IEC 60068-2-1 Accredited Testing Labs in United States
9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform IEC 60068-2-1 testing. These labs commonly handle Electronic, Oil matrices. Most frequently tested analytes via this method in United States: Temperature. Accredited providers include Cascade Engineering Services,, DEKRA Testing and Certification (Shanghai), DEKRA IST Reliability Services, Green Mountain Electromagnetics, SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch. Sites located in Shanghai, Redmond, WA, Jiangsu Province, People’s Republic of China, Middlebury, VT, Shenzhen, Guangdong.
Accredited Labs
(A2LA Cert. No. 3521.01) 11/17/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CASCADE ENGINEERING SERVICES, INCORPORATED 6640 185th Ave. NE Redmond, WA 98052 Nathan Isler Phone: 425-895-8617 Nathan.Isler
(A2LA Cert. No. 4267.02) 06/25/2025 Page 2 of 9 Test Technology: Test Method(s): Pin insertion inclination/misuse safe (scoop- proofing) VW80332 section 13.10; VW75174 section 6.10 Contacts: Conductor pull-out strength
(A2LA Cert. No. 2774.01) 02/21/2025 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 DEKRA IST RELIABILITY SERVICES LIMITED No. 26 Wusongjiang So
(A2LA Cert. No. 0898.01) 11/26/2025 Page 3 of 3 MECHANICAL Test Technology: Test Method(s): Environmental Cold IEC 60068-2-1; EN/IEC 60945, Section 8.3 Dry Heat IEC 60068-2-2; EN/IEC 60945, Section 8.2 Heat wi
(A2LA Cert. No. 3816.01) 06/24/2025 Page 19 of 23 MECHANICAL Test Technology: Test Method(s)2,3: Environmental Simulation Cold Dry Heat Damp Heat Vibration (sinusoidal) IEC 60068-2-1; IEC 60068-2-2;
(A2LA Cert. No. 2357.23) Revised 1/9/2026 Page 3 of 6 Test Type/Equipment Capabilities: Test Methods: High/Low Temperature – (-75 to +190) ºC MIL-STD-810C: Method 501.1; MIL-STD-810D: Method 501.2; MIL-STD-810E: Method 501
(A2LA Cert. No. 4301.05) 07/31/2025 Page 6 of 7 Test Technology Test Capabilities Test Method(s)1: Environmental Simulation Temperature: (-70 to 250) ºC Relative Humidity: (10 to 98) %RH Ramp Rate: Maximum 15 ºC/min fro
(A2LA Cert. No. 2343.02) Revised 11/24/2025 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 BUREAU VERITAS LCIE CHINA COMPANY LIMITED 1 No.829, Xin Zhuan Road, Song Jiang District, Shanghai, People’s Republic
(A2LA Cert. No: 2976.01) 03/21/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AUSTIN RELIABILITY LABS 12317 Technology Blvd, Suite 100 Austin, TX 78727 Larry Legler Phone: 512-623-4717 MECHANICAL V
Top matrices for IEC 60068-2-1 in United States
Top analytes for IEC 60068-2-1 in United States
- Temperature (2)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.