ASTM D2240 Accredited Testing Labs in United States
40 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D2240 testing. These labs commonly handle Drinking water, Plastics, Fasteners matrices. Most frequently tested analytes via this method in United States: Hardness, Length, Dimensional Stability. Accredited providers include Technical Maintenance, Inc. - PEACHTREE CORNERS, Technical Maintenance, Inc. - COLORADO SPRINGS, JJ Calibrations, Technical Maintenance, Inc. - TEMPLE TERRACE, Technical Maintenance, Inc. - WINDSOR. Sites located in Peachtree Corners, GA, Colorado Springs, CO, Portland, OR, Temple Terrace, FL, Suite B Windsor, CT.
Accredited Labs
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 0723.01) 03/17/2025 Page 12 of 15 Parameter/Equipment Range7 CMC2, 4, 6 (±) Comments Indirect Verification of Rockwell Hardness Testers 3 HRBW: Medium High HRC: Low Medium High 1.2
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 1277.01) Revised 07/16/2025 Page 20 of 24 Parameter/Equipment Range CMC2, 4, 6, 10 (±) Comments Durometers – Indenter Extension & Shape Diameter Radius Angle Extension Indenter Display
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 1741.13) Revised 01/27/2025 Page 20 of 26 Parameter/Equipment Range CMC2, 7, 11 (±) Comments Torque – Wrenches Measure3 (10 to 100) ozf·in (4 to 250) lbf·ft (250 to 2000) lbf·ft 0.65
(A2LA Cert. No. 1625.01) Revised 07/08/2025 Page 38 of 45 Parameter/Equipment Range CMC2 (±) Comments Capillary Rheometers3 – Rubber cont. Crosshead Speed Force Pressure Up to 25.4 mm/min Up to 5000 lbf
(A2LA Cert. No. 0414.01) Revised 11/03/2025 Page 5 of 15 Test Standard Cyclic Corrosion (continued) GMW14872; HINO HTSH1555; ISO 11997-1; NISSAN NES M0158; NES M0007 (2014-1) (34); RIVIAN RTS.1681; SAE J2334; SAE J2721; TESLA
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 0462.01) 10/14/2024 Page 18 of 20 Parameter/Equipment Range CMC2 (±) Comments Direct Verification of Durometers – (cont) Verification of Indenter Shape & Extension: Types B, D, & M Types
(A2LA Cert. No. 2422.01) 06/12/2024 Page 4 of 4 Test Description: Method(s): Non-active surgical implants – Mammary implants – Particular Requirements ISO 14607 Annex C1 and C2 Mechanical Contraceptives – Reusable Na
(A2LA Cert. No. 1888.11) Revised 11/19/2025 Page 23 of 33 Parameter/Equipment Range CMC2, 4, 5, 8 (±) Comments Durometers10 (Types A & D) Indenter Dimensions Extension Diameter Angle
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 0462.02) Revision 4/09/2025 Page 16 of 20 Parameter/Equipment Range CMC2, 5, 9 (±) Comments Durometers3 Indenter Extension & Shape: Diameter Radius Angle Extension Indenter
(A2LA Cert. No. 1171.02) 12/17/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CONSTELLATION TECHNOLOGY CORPORATION 7887 Bryan Dairy Road, Suite 100 Largo, FL 33777-1498 Donna Swartz Phone: 727 547
(A2LA Cert. No. 1848.01) Revised 09/11/2025 Page 15 of 21 Parameter/Equipment Range CMC2, 4 (±) Comments EQUOTIP (Leeb) – Indirect Verification, Fixed Point3 801 Leeb D Hardness 16 Leeb D Hardness Method: ACP-020
(A2LA Cert. No. 1746.01) 10/15/2025 Page 3 of 18 Parameter/Equipment Range CMC2, 4 (±) Comments Sieves – Opening Size (X/Y) & Wire Diameter (X/Y) Up to 5 in (88 + 15L) µin ASTM E11 Optical co
(A2LA Cert. No. 1078.01) Revised 2/20/2026 Page 55 of 63 VIII. Mechanical Parameter/Equipment Range CMC2, 4, 8 (±) Comments Accelerometers3 Frequency Response Voltage Sensitivity Charge
(A2LA Cert. No. 3692.02) 11/17/2025 Page 13 of 14 Parameter/Equipment Range CMC2, 4 (±) Comments Durometer – Spring Calibration Force Types Shore A Types S
(A2LA Cert. No. 4831.01) 06/18/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CENTRE TESTING INTERNATIONAL (SHANGHAI) CO., LTD. Building 2 1-3/F and Building 5, No.777 Xin Jun Ring Road, Minhang Shanghai, Peop
(A2LA Cert. No. 3781.01) Revised 11/21/2025 Page 13 of 16 V. Mechanical Parameter/Equipment Range CMC2 (±) Comments Direct Verification of Durometers – Type A, B, C, D Indenter Geometry – Le
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 1166.01) 10/17/2025 Page 19 of 26 IV. Fluid Parameter/Equipment Range CMC2, 5 (±) Comments Viscometers3 – Fixed Points C20 C60 C100 RT100 RT1000 RT5000 RT12 500 RT30 000 RT100 000 0.
(A2LA Cert. No. 3022.01) 11/12/2024 Page 24 of 33 VII. Mechanical Parameter/Equipment Range CMC2 (±) Comments Durometer 3 – (Types: A, B, C, D, DO, E, M, O, OO, OOO, OOO-S, R)
(A2LA Cert. No. 0078.02) Revised 01/07/2026 Page 6 of 17 Test *: Test Method(s) 1,2: Dimensional Stability ASTM D1204; LP-463LB-7-01; GM 7400M (3.2.3.1.7) Dimensional Stability (Continued) SAE J883; GMW4217 Durometer - Sh
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 1297.01) Revised 12/17/2024 Page 15 of 18 Parameter/Equipment Range CMC2, 5, 10 (±) Comments Direct Verification of Durometers – Scale Accuracy: Type A, B, C, D, DO, E, M, O, OOO, OOO-S, R Type OO I
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 4184.01) 05/20/2025 Page 13 of 53 Parameter/Equipment Range CMC2, 5 (±) Comments Volumetric Flasks Up to 1000 mL (1000 to 5000) mL 0.17 mL/L 0.14 mL/L KQT-VO-01, standard weight
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 1346.01) Revised 2/24/2026 Page 18 of 38 Parameter/Equipment Range CMC2, 4, 6 (±) Comments Accelerometers – (1 to 10) g (5 to < 10) Hz (10 to < 100) Hz 100 Hz (> 100 to < 2000) Hz (2 to 10) kHz
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
Page 187 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 4 Comments Welders3 – AC Voltage 10 Hz to 20 kHz AC Current 10 Hz to 20 kHz DC Voltage DC Current Up to 750
(A2LA Cert. No. 7783.01) Revised 12/16/2025 Page 11 of 27 Test Method: Test Description: ASTM D1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice D
(A2LA Cert. No. 6176.01) 12/11/2024 Page 22 of 25 Parameter/Equipment Range CMC2, 5, 6 (±) Comments Durometer – Indentor Spring Force3 Only Type A, B, C, D, DO, E, M, O, OO, OOO, OOO-S U
(A2LA Cert. No. 1331.01) 07/16/2025 Page 8 of 11 Parameter/Equipment Range CMC2 (±) Comments Capillary Rheometer3 – Temperature Uniformity Bore Shaft – Inside Diameter Other Dimensional Re
(A2LA Cert. No. 1022.01) Revised 02/10/2026 Page 68 of 74 Parameter/Equipment Range CMC2, 4, 5 (±) Comments Pressure3 – Measure & Generate (cont) Pneumatic (8 to 17) psia (-15 to 15) psig (-15 to 50)
(A2LA Cert. No. 0850.03) Revised 05/28/2025 Page 3 of 4 Test Description/Parameter: Test Method(s): Fogging GMW 3235; LP-463DB-12-01; SAE J1756 Hardness –
Top matrices for ASTM D2240 in United States
Top analytes for ASTM D2240 in United States
- Hardness (6)
- Length (2)
- Dimensional Stability (1)
- Durometer Hardness (1)
- Rubber Hardness (1)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.
Related searches
- CA (3)
- MX (1)