Metal Testing Labs in United States
33 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform Metal testing. Common methods used to test Metal in United States: astm-e18, astm-a370, astm-e8-e8m. Most frequently tested analytes in this matrix in United States: Hardness, Rockwell Hardness, Lead. Accredited providers include Arista Materials & Consulting, LLC., Howmet Research Center, ACT Test Services, Dickson Testing Company, McCrone Associates. Sites located in Houston, TX, Whitehall, MI, Hillsdale, MI, South Gate, CA, Westmont, IL.
Accredited Labs
(A2LA Cert. No. 4464.01) 01/27/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ARISTA MATERIALS & CONSULTING, LLC. 3621 Bacor Rd. Houston, TX 77084 Ms. Lisette Da Costa Phone: (281) 492-0
(A2LA Cert. No. 2208.01) 03/28/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 HOWMET RESEARCH CENTER 1500 S. Warner St. Whitehall, MI 49461-1895 Michelle McDonald Phone: 231 894 7586 MECHAN
(A2LA Cert. No. 2745.01) 11/21/2024 Page 1 of 9 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Philip Frisch Phone: 517-439-1485 MECHANICAL
(A2LA Cert. No. 1772.02) 05/20/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 DICKSON TESTING COMPANY, INC. 11126 Palmer Avenue South Gate, CA 90280 Ronald Arevalo Phone: 562 862 8378 MECHANICAL Valid T
(A2LA Cert. No. 3631.01) Revised 10/03/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MCCRONE ASSOCIATES, INC. 850 Pasquinelli Drive Westmont, IL 60559 Kent L. Rhodes
(A2LA Cert. No. 0248.01) 12/31/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 VELTEC LABORATORIES 12255 Universal Taylor, MI 48180 Billy Martin Phone: 734 946 0440 MECHANICAL Valid To: D
(A2LA Cert. No. 3180.01) Revised 09/22/2025 Page 13 of 13 Test/Tested Product Test Method(s) Chemical Tests (cont’d) Lead in Non-Metal Children’s Products CPSC-CH-E1002-08, CPSC-CH-E1002-08.1, CPSC-CH-E1002-08.2, CPSC-CH-E
(A2LA Cert. No. 1299.01) Revised 01/24/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 KIEH CORPORATION 747 Church Rd., Suite D4 Elmhurst, IL 60126 Lindsey Ruszkowski Phone: 708-544-8811 MEC
(A2LA Cert. No. 3282.01) 01/20/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TOUCHSTONE TESTING LABORATORY, LLC1 1094 Middle Creek Road Triadelphia, WV 26059 Claudette Young (304) 907-4010 Email:
(A2LA Cert. No. 1684.01) Revised 8/15/2025 Page 2 of 24 II. Electrical – DC/Low Voltage Parameter/Equipment Range CMC2 (±) Comments Metal Detector3 Ferrous Ferrous Ferrous Ferrous Ferrous Ferrous Non-Ferrous N
(A2LA Cert. No. 5277.01) 12/27/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PROTECH LAB CORPORATION 147 Island Dr. Hilton Head, SC 29926 Brandon Bright Phone: 8
(A2LA Cert. No. 3034.01) 04/02/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CERTIFIED LABORATORIES 3125 North Damon Way Burbank, CA 91505 Randal Garrett Phone: (2
(A2LA Cert. No. 5742.01) Revised 03/06/2024 Page 2 of 2 Test: Test Method(s): Facing Properties of Sandwich Constructions by Long Beam Flexure ASTM D7249 In-Plane Shear Stress/Shear Strain Response by ±450 Tension Test ISO 14129 De
(A2LA Cert. No. 1296.01) 12/01/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TOUCHSTONE MEASUREMENT SERVICE, LLC 2529 Commerce Drive, Suite F Kokomo, IN 46902 John Cornell Phone: 765 454 5888
(A2LA Cert. No. 7425.03) 09/29/2025 Page 1 of 6 SCOPE OF ACCREDITATION TO ISO/IEC 1
(A2LA Cert. No. 0878.01) 04/22/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MATERIALS TECHNOLOGY, INC. 213 Lyon Lane Birmingham, AL 35211 Jessica Fortner Phone: 205 940 9480 MECHANICAL Valid To:
(A2LA Cert. No. 6611.01) Revised 06/09/2025 Page 3 of 5 Test: Test Method: ASTM E8 Standard test methods for tension testing of metallic materials ASTM E72 Standard test methods of conducting strength tests of panels for build
(A2LA Cert. No. 3065.01) 11/06/2024 Page 2 of 2 Test Technology: I. Mechanical Tests Continued Test Methods: Uniaxial Tensile ASTM A370, B557, D412, D638, E8/E8M, E21 Compression Testing of Metallic Materials at Roo
(A2LA Cert. No. 2736.01) 09/25/2024 Page 16 of 18 Parameter/Equipment Range CMC2, 4 (±) Comments Volume – Pipettes3 (0.1 to 1) µL (2 to 5) µL (6 to 20) µL (1 to 5) µL (6 to 10) µL (1
(A2LA Cert. No. 2455.03) Revised 10/22/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 KTA – TATOR, INC. 1506 Parkway View Dr. Pittsburgh, PA 15205 Kim Werry Phone: 412 746 4301 kwerry@kta.com
(A2LA Cert. No. 0940.01) 09/29/2025 Page 3 of 6 CHEM-PLATE INDUSTRIES INC. 1990 East Devon Avenue Elk Grove Village, IL 60007 Test Test Method(s) Rockwell Hardness (A, BW, C, 15N, 30N) ASTM E18, F606/F606M, GM 6010M (Secti
(A2LA Cert. No. 4661.04) 11/17/2025 Page 1 of 7 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 APPLIED TECHNICAL SERVICES 6002 S. Ash Ave Tempe, AZ 85283 Jacob Escobedo Phone: 480-705-4493 E-mail: Jescobedo@atslab.com
(A2LA Cert. No. 6425.01) 06/10/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AeroTech Engineering Consultants 6 Industrial Rd. Windsor Locks, CT 06096 Jonathon Matlach Phone: 860-238-1900 MECHAN
(A2LA Cert. 0510.01) 12/10/2024 Page 2 of 2 Test Description: Test Method(s): Hardness Rockwell: A, BW, C, 15N, 30N, 45N 15TW, 30TW, 45TW Brinell: 187.5, 500, 750, 3000Kgf, Ball Dia. 2.5, 5.0 and 10 mm Macro
(A2LA Cert. No. 0296.02) Revised 07/07/2025 Page 2 of 3 Test Test Method Metallic Materials Testing Fatigue High Cycle ASTM E466; E50TF148 Low Cycle ASTM E606; E50TF148 Tensile Elevated Temperature ASTM
(A2LA Cert. No. 7783.03) Revised 12/16/2025 Page 1 of 10 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ICC Evaluation Service, LLC 58640 State Road 15 Goshen, Indiana 46528 Luis Sotelo (Authorized Representative) (574) 53
(A2LA Cert. No. 1735.03) 08/21/2025 Page 2 of 2 CHEMICAL Test Description: Test Method(s): Analysis by ICP: Determining Lead (Pb) In Surface Coating 16 CFR 1303; CPSC-CH-E1003-09 (-09.1) Determining Lead (Pb) in
(A2LA Cert. No. 3119.01) Revised 11/04/2025 Page 2 of 3 Test Method: Tension Test (Metallic Materials) Test(s): API 6A, 5L X60,1104; ASTM A370 Section(s) 7-14, B557/B557M, E8/E8M; API 934-A, 943-E; ASME BPVC Section VIII Div
(A2LA Cert. No. 2631.01) 09/25/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 INNOVATIVE TEST SOLUTIONS, INC. 551 Kings Road Schenectady, NY 12304 Sam Acevedo Phone: 518 688 2851 x506 MECHANICA
(A2LA Cert. No. 0781.01) 03/17/2025 Page 2 of 3 Test Test Method(s) Wet Chemistry Measurements (cont’d) Gravimetric Density (Powder Metal) ASTM B328 Tin Coating Weight ASTM B545, B659 Zinc Coating Weight
(A2LA Cert. No. 0221.01) 06/30/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AJAX LABORATORY SERVICES1 Testing Laboratory: 4651 Bellevue Avenue Detroit, MI 48207 Frank Buono Phone: 313 267 2100 fbuono@ajaxme
(A2LA Cert. No. 1523.01) 01/28/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MATERIALS ENGINEERING OF ILLINOIS, INC. 47W605 I. C. Trail Virgil, IL 60151 Melanie Reibly Phone: (630) 365 - 9060 MECH
(A2LA Cert. No. 0717.05) 07/02/2024 Page 1 of 7 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ATLAS WEATHERING SERVICES GROUP 1500 Bishop Court Mt. Prospect, IL 60056 Dan McGovern Phone: 773 289 5788
Top methods used to test Metal in United States
Top analytes for Metal in United States
- Hardness (4)
- Rockwell Hardness (2)
- Lead (2)
- Lead (Pb) (1)
- Porosity (1)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.