FindTestingLabs

EN ISO 7393-2:2018-04 Accredited Testing Labs in Poland

4 laboratories in Poland are accredited by PCA under ISO/IEC 17025 to perform EN ISO 7393-2:2018-04 testing. These labs commonly handle Drinking water, Pool water, Wastewater matrices. Most frequently tested analytes via this method in Poland: Ammonium Nitrogen, Chlorine, Chlorine Concentration. Accredited providers include Eurofins OBIKŚ Polska, SGS Polska Sp. z o.o., Centralne Laboratorium Pomiarowo-Badawcze, "EKO-SERWIS" s.c. Dorota Markowska, Maciej Markowski. Sites located in Katowice, Pszczyna, Jastrzębie Zdrój, Łódź.

Labs
4
Top matrix
Drinking water
1 labs
Top analyte
Ammonium Nitrogen
1 labs
Primary AB
PCA
4 labs

Accredited Labs

Eurofins OBIKŚ Polska
Katowice, PL

PCA Zakres akredytacji Nr AB 213 Wydanie nr 27, 06.11.2025 r. 5/78 Przedmiot badań/wyrób Rodzaj działalności/ badane cechy/metoda Dokumenty odniesienia Woda Woda do spożycia przez ludzi Ścieki oczyszczone Stężenie chloru

SGS Polska Sp. z o.o.
Pszczyna, PL

PCA Zakres akredytacji Nr AB 313 Wydanie nr 42, 02.02.2026 r. 39/74 Przedmiot badań/wyrób Rodzaj działalności/badane cechy/metoda Dokumenty odniesienia Ścieki Stężenie

Centralne Laboratorium Pomiarowo-Badawcze
Jastrzębie Zdrój, PL

PCA Zakres akredytacji Nr AB 300 Wydanie nr 34, 01.09.2025 r. 16/75 Przedmiot badań/wyrób Rodzaj działalności/badane cechy/metoda Dokumenty odniesienia Woda, ścieki Stężenie chloru wolnego Zakres: (0,02 – 10,0

"EKO-SERWIS" s.c. Dorota Markowska, Maciej Markowski
Łódź, PL

PCA Zakres akredytacji Nr AB 667 Wydanie nr 28, 14.11.2025 r. 11/15 Przedmiot badań/wyrób Rodzaj działalności/ badane cechy/metoda Dokumenty odniesienia Woda na pływalniach Stężenie chloru wolnego Zakres: (0,05 – 2,0) mg/l

Top matrices for EN ISO 7393-2:2018-04 in Poland

Top analytes for EN ISO 7393-2:2018-04 in Poland

  • Ammonium Nitrogen (1)
  • Chlorine (1)
  • Chlorine Concentration (1)
  • Free Chlorine (1)

About ISO/IEC 17025 in Poland

Polish Centre for Accreditation (PCA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Poland.

ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.

Related searches

All accredited testing labs in Poland