Plastics Testing Labs in Germany
80 laboratories in Germany are accredited by DAKKS under ISO/IEC 17025 to perform Plastics testing. Common methods used to test Plastics in Germany: iso-178, iso-868, en-iso-9001. Most frequently tested analytes in this matrix in Germany: Gesamtmigration, Hardness, Density. Accredited providers include Weber & Leucht, RST Rail System Testing, HESSEL Ingenieurtechnik, DIK Prüfgesellschaft mbH, Hohenstein India Pvt.. Sites located in Hamburg, Berlin, Fürth, Frankfurt am Main, St. Wendel.
Accredited Labs
Anlage zur Teil-Akkreditierungsurkunde D-PL-17072-01-01 Gültig ab: 03.01.2025 Ausstellungsdatum: 03.01.2025 Seite 9 von 12 DIN EN ISO 12138 2018-05 Textilien – Nichtgewerbliche Waschverfahren für Textilien vor der Entfl
Anlage zur Akkreditierungsurkunde D-PL-11012-01-01 Gültig ab: 10.04.2024 Ausstellungsdatum: 19.09.2025 Seite 8 von 10 DIN EN 1021 -2 2014 -10 Möbel - Bewertung der Entzündbarkeit von Polstermöbeln - Teil 2: Eine einem Strei
Annex to the Accreditation Certificate D-PL-11080-01-01 Valid from : 09.04.20 24 Date of issue : 10.09.2025 page 3 of 3 This document is a translation. The definitive version is the original German annex to the accreditation certi
Anlage zur Teil-Akkreditierungsurkunde D-PL-21095-01-01 1 Mechanisch-technologische Prüfungen [Flex Ei] DAkkS Deutsche Akkreditierungsstelle 1.1 Härteprüfung von Elastomeren oder thermoplastischen Elastomeren DIN ISO 48 2016-09 DIN ISO7619-
Annex to the Accreditation Certificate D-PL-21147-01-01 Valid from : 20.06.2025 Valid to: 12.11.2028 Date of issue : 20.06.2025 page 19 of 20 SATRA TM154 2018 -03 Shoe lace to shoe lace and shoe lace to lace carrier abrasio
Annex to the accreditation certificate D-PL-19381-03-00 Valid from: 18.05.2022 Date of issue: 29.07.2022 Page 3 of 12 - Translation - 2.2 Mechanical and technological tests * ASTM D 256 2010 Standard Test Methods for Dete
Anlage zur Akkreditierungsurkunde D-PL-14563-01-01 Gültig ab: 30.07.2025 Ausstellungsdatum: 13.08.2025 Seite 14 von 19 ASU B 80.30 -6 2008-10 Untersuchung von Bedarfsgegenständen - Kunststoffe - Teil 3: Prüfverfahren f
Anlage zur Teil-Akkreditierungsurkunde D-PL-19230-01-01 ASU B 80.30-17 (EG) 2008-10 ASU B 80.30-18 (EG) 2008-10 Council of Europe Resolution CM/Res 9 on metals and alloys used in food contact materials and articles Kapitel 3 2013 DAkkS Deut
Anlage zur Teil-Akkreditierungsurkunde D-PL-21123-01-02 Gültig ab: 13.02.2025 Ausstellungsdatum: 13.02.2025 Seite 2 von 8 Prüfung in den Bereichen: mechanisch-technologische Untersuchungen und thermische Analysen an polymeren B
Annex to the accreditation certificate D-PL-14435-01-00 Valid from: 19.05.2025 Date of issue: 19.05.2025 Page 5 of 10 - Translation - 3.7 Determination of elements in commodity goods definded by the LFGB (German Food and Feed Cod
Anlage zur Akkreditierungsurkunde D-PL-19134-01-00 Gültig ab: 05.09.2024 Ausstellungsdatum: 05.09.2024 Seite 3 von 3 3 Physikalische Untersuchungen DIN EN ISO 1183 -1 2019-09 Kunststoffe – Verfahren zur Bestimmung der Dicht
Anlage zur Teil-Akkreditierungsurkunde D-PL-11303-01-02 Gültig ab: 02.05.2025 Ausstellungsdatum: 02.05.2025 Seite 2 von 6 Prüfung in den Bereichen: mechanisch/technologische und thermische Prüfungen an Kunststoffen und Beschic
Anlage zur Teil-Akkreditierungsurkunde D-PL-14235-01-03 Gültig ab: 29.07.2024 Ausstellungsdatum: 29.07.2024 Seite 2 von 2 Prüfungen in den Bereichen: mikrobiologische Untersuchungen von Bedarfsgegenständen Dem Prüflaboratoriu
Anlage zur Teil-Akkreditierungsurkunde D-PL-14013-01-01 Gültig ab: 28.03.2025 Ausstellungsdatum: 28.03.2025 Seite 35 von 42 VitaFast® Inositol P 1009 2016-10 Mikrobiologische Mikrotiterplatten -Tests zur quantitativen
Annex to the Accreditation Certificate D-PL-11158-01-02 Valid from : 27.10.2025 Valid to: 27.01.2027 Date of issue : 27.10.2025 page 13 of 17 CTS -HL -309 -1 2011-02 Determination of plasticizers (Triphenylphosphate, Tri-o-c
Anlage zur Teil-Akkreditierungsurkunde D-PL-11217-01-02 DAkkS Deutsche Akkreditierungsstelle DIN EN ISO 3451-1 Kunststoffe Bestimmung der Asche — Teil 1: Allgemeine Grundlagen 2019-05 DIN EN ISO 4892-3 Kunststoffe — Künstliches Bestrahlen o
Anlage zur Akkreditierungsurkunde D-PL-11223-06-00 Gültig ab: 03.01.2024 Ausstellungsdatum: 28.04.2025 Seite 2 von 2 Prüfungen in den Bereichen: mechanisch-technologische Prüfungen von Kunststoffen Flexibler Akkreditierung
Anlage zur Akkreditierungsurkunde D-PL-14162-01-05 Gültig ab: 30.09.2025 Ausstellungsdatum: 30.09.2025 Seite 107 von 123 Parameter § 4 Abs. 9 BioAbfV Standort Chrom (aus Königswasseraufschluss) DIN ISO 11047:2003 -05
Anlage zur Teil-Akkreditierungsurkunde D-PL-11222-01-01 Gültig ab: 09.08.20 24 Ausstellungsdatum: 09.08.2024 Seite 9 von 11 ISO 6721 -5 2019 -04 Kunststoffe – Bestimmung dynamisch -mechanischer Eigenschaften – Teil 5:
(A2LA Cert. No. 0717.08) 07/26/2024 Page 2 of 4 DIN (Deutsches Institut für Normung) DIN EN ISO 4628-4 Paints and Varnishes – Assessment of Coating Damage – Assessment of the Amount and Magnitude of Damage and the Intensity of Unif
Anlage zur Akkreditierungsurkunde D-PL-14047-01-01 Gültig ab: 10.12.2024 Ausstellungsdatum: 02.05.2025 Seite 16 von 16 3.4 Physikalische Parameter und Fremdstoffe Parameter § 2a Abs. 7 und § 4 Abs. 9 BioAbfV Trockenrüc
Anlage zur Akkreditierungsurkunde D-PL-11045-01-01 Gültig ab: 26.08.2025 Ausstellungsdatum: 26.08.2025 Seite 2 von 9 Physikalische und mechanisch-technologische Prüfungen von Geokunststoffen (Dichtungsbahnen), Geotextilien, Kun
Annex to the accreditation certificate D-PL-11054-01-00 Valid from: 18.02.2022 Date of issue: 18.02.2022 Page 46 of 59 - Translation - 4.2 Determination of Surface Characteristics * Testing - and measuring devices / process
Anlage zur Teil-Akkreditierungsurkunde D-PL-14083-01-04 Gültig ab: 21.01.20 25 Ausstellungsdatum: 13.10.2025 Seite 26 von 37 7.4 Physikalische Parameter und Fremdstoffe Parameter § 2a Abs. 7 und § 4 Abs. 9 BioAbfV Troc
Anlage zur Akkreditierungsurkunde D-PL-23019-01-01 Gültig ab: 05.08.2025 Ausstellungsdatum: 05.08.2025 Seite 4 von 5 Die folgenden 2 Prüfverfahren befinden sich außerhalb des flexiblen Akkreditierungsbereichs: PTS -DF 103
Anlage zur Akkreditierungsurkunde D-PL-18176-01-01 Ausstellungsdatum: 08.10.2020 Gültig ab: 08.10.2020 Seite 6 von 9 Parameter, die nicht in den Anlagen 1 bis 3 der Trinkwasserverordnung enthalten sind Weitere periodische U
DAkkS Deutsche Anlage zur Akkreditierungsurkunde D-PL-14150-01-00 Akkreditierungsstelle US 16 CFR Part 13 PFI 30/1003 2016-12 PFI 30/1027 2020-01 PFI 30/1045 2016-12 16 Commercial Practices Chapter II - Consumer Product Safety Commission -
(A2LA Cert. No. 859.03) 11/12/2024 Page 1 of 7 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Q-LAB DEUTSCHLAND GMBH2 In den Hallen 30 66115
Annex to the Partial Accreditation Certificate D-PL-17362-01-04 Valid from : 23.02.2023 Date of issue : 11.12.2023 Page 2 of 2 This document is a translation. The definitive version is the original German annex to the accreditation
Anlage zur Teil-Akkreditierungsurkunde D-PL-17442-01-03 Gültig ab: 02.01.2024 Ausstellungsdatum: 02.01.2024 Seite 3 von 4 SOP -Nr. 1978 2023-01 Untersuchung von Konservierungsstoffen in kosmetischen Mitteln 1.3 Bestim
Anlage zur Akkreditierungsurkunde D-PL-19634-01-00 Gültig ab: 14.05.2025 Ausstellungsdatum: 16.09.2025 Seite 15 von 24 BMW AA -0471 2017-03 Abriebfestigkeit mit Abrex -Normprüfgerät GMW 14698 2016-04 Scratch Res
Anlage zur Teil-Akkreditierungsurkunde D-PL-14026-01-02 Gültig ab: 19.06.2025 Ausstellungsdatum: 19.06.2025 Seite 63 von 76 Parameter § 4 Abs. 9 BioAbfV Standort Kupfer (aus Königswasseraufschluss) DIN ISO 11047:2003 -0
Annex to the Partial Accreditation Certificate D-PL-12083-01-03 Valid from: 19.07.2023 Date of issue: 19.07.2023 Page 8 of 13 DIN EN ISO 12947-2 2017-03 Textiles - Determination of the abrasion resistance of fabrics by the Mar
Anlage zur Akkreditierungsurkunde D-PL-11130-01-01 Gültig ab: 25.09.2025 Ausstellungsdatum: 25.09.2025 Seite 17 von 27 Quellenverzeichnis Regelwerke/Prüfverfahren: Standort Ochsenhausen DIN EN ISO 527 -1 2019-12 Kunststof
Annex to the Accreditation Certificate D-PL-18566-01-00 Valid from : 31.03.2025 Date of issue : 22.04.2025 Page 5 of 15 This document is a translation. The definitive version is the original German annex to the accreditation cert
Anlage zur Akkreditierungsurkunde D-PL-19060-01-00 Gültig ab: 26.01.2021 Ausstellungsdatum: 26.01.2021 Seite 2 von 4 1 Umweltsimulationen und Beständigkeitsprüfungen an Beschichtungsstoffen 1.1 Bewitterung mittels Xenonbo
Annex to the accreditation certificate D-PL-12148-01-00 Valid from: 13.07.2022 Date of issue: 14.07.2022 Page 3 of 64 - Translation - Type of test Standard or test method / version Title of the standard or test method Restri
Anlage zur Akkreditierungsurkunde D-PL-19033-01-01 Gültig ab: 15.08.2025 Ausstellungsdatum: 15.08.2025 Seite 18 von 36 DIN EN ISO 182 -2 2000-02 Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der B
Anlage zur Akkreditierungsurkunde D-PL-14312-01-00 Gültig ab: 30.01.2025 Ausstellungsdatum: 30.01.2025 Seite 25 von 91 DIN EN ISO 3071 2020-05 Textilien - Bestimmung des pH des wässrigen Extraktes (Einschränkung: hier
Annex to the Partial Accreditation Certificate D-PL-11104-01-02 Valid from : 18.10.2024 Valid to: 13.04.2028 Date of issue : 18.10.2024 Page 12 of 14 1.8 Heavy metal in paint Layers and similar coatings or in Substrates and
Annex to the accreditation certificate D-PL-18196-01-00 Valid from: 22.11.2021 Date of issue: 22.11.2021 Page 4 of 4 - Translation - DIN EN ISO 11357 -1 2017-02 Plastics - Differential scanning calorimetry (DSC) - Part 1:
Anlage zur Teil-Akkreditierungsurkunde D-PL-11303-01-01 Gültig ab: 25.10.2023 Ausstellungsdatum: 25.10.2023 Seite 2 von 2 DIN 53394 -2 1993-12 Prüfung von Kunststoffen; Bestimmung von monomerem Styrol in Reaktionsharzformsto
Annex to the Partial Accreditation Certificate D-PL-11180-01-03 Valid from : 06.11.2023 Valid to: 24.07.2027 Date of issue : 06.11.2023 Page 5 of 7 Testing field Standard / In-House Procedure / Version Title of Standard or
Anlage zur Teil-Akkreditierungsurkunde D-PL-17196-01-01 Gültig ab: 13.01.2025 Ausstellungsdatum: 13.01.2025 Seite 9 von 9 7.2.2 Bestimmung thermoanalytischer Eigenschaften von Kautschuk, Elastomeren und thermoplastischen Elast
Anlage zur Akkreditierungsurkunde D-PL-14184-01-00 Gültig ab: 31.01.2024 Ausstellungsdatum: 05.04.2024 Seite 18 von 47 ASU B 82.02-1:1985-06 Untersuchungen von Bedarfsgegenständen; Bestimmung der Formaldehydabgabe aus textilen
Annex to the Accreditation Certificate D-PL-21392-01-00 Valid from : 13.12.2024 Date of issue : 13.12.2024 Page 2 of 6 Tests in the fields: Mechanical, climatic and physical-chemical resistance tests on coating materials and pl
Anlage zur Teil-Akkreditierungsurkunde D-PL-14137-09-01 Gültig ab: 16.05.2024 Ausstellungsdatum: 16.05.2024 Seite 2 von 5 1 Mechanisch-technologische Werkstoffprüfungen 1.1 Härteprüfung DIN EN ISO 6506 -1 2015-02 Metall
Anlage zur Akkreditierungsurkunde D-PL-18702-01-00 Gültig ab: 23.06.2023 Ausstellungsdatum: 23.06.2023 Seite 2 von 9 Inhaltsverzeichnis 1 Textile Bodenbeläge ............................. ....................................
Anlage zur Akkreditierungsurkunde D-PL-14234-01-01 Gültig ab: 11.08.2025 Ausstellungsdatum: 11.08.2025 Seite 24 von 26 2.1.7 Gravimetrische Untersuchungen von Bedarfsgege nständen [Flex A] ASU B 80.30 -6 2008-10 Untersuc
Anlage zur Akkreditierungsurkunde D-PL-21173-01-01 Gültig ab: 19.09.2025 Ausstellungsdatum: 19.09.2025 Seite 4 von 6 DIN EN ISO 2813 2015-02 Beschichtungsstoffe – Bestimmung des Glanzwertes unter 20°, 60° und 85° VDA 75
Showing labs 1–50 of 80. Use pagination below to see more.
Top methods used to test Plastics in Germany
Top analytes for Plastics in Germany
- Gesamtmigration (5)
- Hardness (4)
- Density (3)
- Formaldehyd (3)
- Lead (3)
About ISO/IEC 17025 in Germany
Deutsche Akkreditierungsstelle (DAKKS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Germany.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.
Related searches
- United States (38)
- United Kingdom (12)
- CA (6)
- JP (3)
- MX (1)
- Netherlands (1)