ISO 15705 Accredited Testing Labs in France
5 laboratories in France are accredited by COFRAC under ISO/IEC 17025 to perform ISO 15705 testing. These labs commonly handle Surface water matrices. Most frequently tested analytes via this method in France: St Dco, Suspended Solids, Ph. Accredited providers include ALS FRANCE, LABORATOIRE EUROFINS EICHROM RADIOACTIVITE, SYSTÈMES PRODUITS ET ANALYSES CHIMIQUES (SYPAC), LAB'EAU HYGIENE ET ENVIRONNEMENT, ASPECT SERVICE ENVIRONNEMENT. Sites located in Unknown, BRUZ, GELLAINVILLE, MONTAUBAN, ENNERY.
Accredited Labs
Convention N° 1058 LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 12/25 # ENVIRONNEMENT / QUALITE DE L’EAU / Analyses physico-chimiques Analyses physico-chimiques des eaux (LAB GTA 05) OBJET CARACTERISTIQUE MESUREE OU
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 16/17 Unité technique : Laboratoire d’analyses de chimie nucléaire #ENVIRONNEMENT / QUALITE DE L’EAU / Analyses physico-chimiques (Analyses physico-chimiques des eaux - LA
Convention N° 807 LAB FORM 37 – Révision 08 – 08 janvier 2019 Page 7/10 #ENVIRONNEMENT / QUALITE DE L’EAU / Analyses physico-chimiques (Analyses physico-chimiques des eaux – LAB GTA 05) OBJET CARACTERISTIQUE MESUREE OU RECHERCHEE PRI
Convention N° 3246 LAB FORM 39 - Rév 03 – 10 Avril 2017 Page 5/13 #ENVIRONNEMENT / QUALITE DE L’EAU / Echantillonnage - Prélèvement (Echantillonnage d’eau dans les établissements de santé - LAB GTA 29) Objet Caractéristique mesurée ou
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 6/8 # ENVIRONNEMENT / QUALITE DE L’EAU / Analyses physico-chimiques (Analyses physico-chimiques des eaux / LAB GTA 05) OBJET CARACTERISTIQUE MESUREE OU RECHERCHEE PRINCIPE
Top matrices for ISO 15705 in France
Top analytes for ISO 15705 in France
- St Dco (2)
- Suspended Solids (2)
- Ph (1)
About ISO/IEC 17025 in France
Comité français d'accréditation (COFRAC) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in France.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.